国产成人精品白浆久久69,专干老熟女300部

聯系我們

18560023440

王經理：18560023440
地址：山東省德州市齊河縣經濟開發區齊眾大道7號-2車間

業內資訊

怎么減少五軸保麗龍雕刻機刀具的消耗量？

來源：http://m.xacfgd.com.cn 時間：2020-12-21

隨著人們對時間效率概念的意識提高，現在的客戶也越來越多的去選擇使用雕刻機加工。雕刻機加工石材相對比手工雕刻，除了效率高外，精度也非常高，五軸保麗龍雕刻機的刀具就顯得尤為重要，如果刀具不好，就會影響雕刻效果。怎樣才能減少雕刻機刀具的消耗量。

With the improvement of people's awareness of the concept of time efficiency, more and more customers choose to use engraving machines. Compared with manual carving, engraving machine has high efficiency and high precision. The tool of five axis styrofoam engraving machine is particularly important. If the tool is not good, it will affect the carving effect. How to reduce the tool consumption of engraving machine.

一、五軸保麗龍雕刻機的本身的原因：

1、 The reasons for the five axis styrofoam carving machine itself are as follows:

雕刻機本身機器原因，Z軸速度太快，容易斷刀，刀夾變形容易斷刀。選主軸功率，石材雕刻機一般4500W就可以了，加工速度可以保證，又能較為省電。因此，在雕刻機技術尚不成熟的階段選擇一款質量較好的雕刻刀是你必須要考慮的。

Engraving machine itself machine reasons, z-axis speed is too fast, easy to break knife, knife clip deformation easy to break knife. Select the spindle power, stone engraving machine 4500W generally can, processing speed can be guaranteed, and can save electricity. Therefore, in the carving machine technology is not mature stage, choose a better quality carving knife is you must consider.

二、五軸保麗龍雕刻機的材質：

2、 Material of five axis styrofoam engraving machine:

材料不符合，金剛石適合雕刻大理石，但是不可能所有的版畫書法都可以雕刻。金剛石適合質地細膩的硬質石材。刀具的使用壽命與走刀的速度關系很大，越硬的石材走刀速度要求越慢

Materials do not match, diamond is suitable for carving marble, but not all prints and calligraphy can be carved. Diamond is suitable for hard stone with fine texture. The service life of the cutter is closely related to the cutting speed. The harder the stone is, the slower the cutting speed is required

三、五軸保麗龍雕刻機的工作環境：

3、 Working environment of five axis styrofoam engraving machine:

雕刻石材的工作環境有水，刀尖與石材接觸部位要有充足的循要有充足的水分。

The working environment of carving stone has water, and the contact part between the tool tip and the stone should have sufficient circulation and sufficient moisture.

四、五軸保麗龍雕刻機的編程：

4、 Programming of five axis styrofoam engraving machine:

在編程時要保證每次下刀時都要柔性進給;對操作者的要求是要在編程時要保證每次下刀時都要柔性進給。刀尖部位要旋轉時接觸物體。

In programming, it is necessary to ensure flexible feed every time when cutting tool; the requirement for operator is to ensure flexible feed every time cutting. Contact the object when the tip is to be rotated.

希望通過小編的介紹可以幫助到您想要了解更多的精彩內容請關注公司網站：http://m.xacfgd.com.cn

We hope that the introduction of Xiaobian can help you. If you want to know more wonderful contents, please pay attention to the company website: http://m.xacfgd.com.cn