国产精品亚洲一区二区三区喷水,欧洲亚洲不卡一区二区,18禁超污无遮挡无码免费动态图

聯系我們

18560023440

王經理：18560023440
地址：山東省德州市齊河縣經濟開發區齊眾大道7號-2車間

業內資訊

木工加工指標參考！

來源：http://m.xacfgd.com.cn 時間：2019-08-30

顧客買了木工,在使用過程中應注意的使用,因?yàn)闄C(jī)械設備有很強的風險,通常使用應該做好保護措施,因?yàn)椴粔K機械的使用引起的常見,下面列出一些木工指標參考。

　　Customers buy Woodworking centers, should pay attention to safe use in the use process, because the machinery and equipment have a strong risk, usually use should do a good job of protection measures, because the use of non-block machinery caused by common, the following list of woodworking centers safety indicators for reference.

　　1、購買木工必須按照輪必須蓋,軸必須覆蓋和鋸條看到封面,封面,飛機(剪切),切一塊,裝置進料要求,在各種木工機械配置相應的保護裝置,尤其是手無寸鐵的操作接觸危險的地區,應該有保護措施。

　　1. Purchase of woodworking centers must cover wheels, shafts and saw blades to see the cover, cover, aircraft (shear), cut a piece, safety device feeding requirements, in a variety of woodworking machinery with corresponding safety protection devices, especially in unarmed areas where operational contact is dangerous, there should be safety protection measures.

　　2、生產噪音、木屑或揮發性有害氣體的木工作業，應配備機械操作的噪音、粉塵或通風裝置，以確保工人的健康。

　　2. Wood workshops producing noise, sawdust or volatile harmful gases should be equipped with mechanical noise, dust or ventilation devices to ensure the safety and health of workers.

　　3,木工刀軸的和電氣控制裝置,在裝卸或更換刀具和維護,可以切斷電源和維護斷開位置,以防意外接觸電源開關或電源突然啟動機器,造成人身傷害事故。

　　3. The center of the woodworking tool axis and the electrical safety control device can cut off the power supply and maintain the disconnection position during loading, unloading or replacing the tool and maintenance, in order to prevent accidental contact with the power switch or sudden start of the machine by power supply, causing personal injury accident.

　　4. 針對木材加工過程中回彈的危險性，應采用送料裝置或隔離刀及防回彈屏，以確保人身。

　　4. In view of the danger of rebound in wood processing, safety feeding device or isolation knife and rebound-proof safety screen should be adopted to ensure personal safety.

　　5. 安裝正常啟?？刂蒲b置時，應專門設置控制裝置，以備發生事故時緊急停車。

　　5. When installing normal start-stop control devices, special safety control devices should be set up for emergency stop in case of accident.

　　6、經常檢查線路，確保無漏電，接地線。

　　6. Check the line regularly to ensure no leakage and grounding wire.